For normal growth: Mix 1 litre of Spray and Walk Away to 5 litres of water
For heavy growth: Mix 1 litre of Spray and Walk Away to 4 litres of water

Yes. 30 Seconds Spray & Walk Away contains active ingredients for the treatment of lichen.

No you cannot use our Spray & Walk Away concentrate in our 2L Rapid Hose End bottle, you will not get the right dilution during application. The Spray & Walk Away 2L Rapid Hose End has a new formulation, increased viscosity (formulation is thicker) for effective delivery of the active ingredient this cannot be manually diluted for this reason. Spray & Walk Away Rapid Hose End is available in a 2L refill pack

Spray and Walk Away hose end will give you coverage of approximately 360m2, however this is dependent on the water pressure (you will need to adjust to medium to high pressure which can be done on the hose end unit in RINSE mode) and the application style of the person using the product. We recommend customers use this product sparingly due to its high concentration, a single swoop motion during application will suffice.

Synthetic grass/Astro Turf? YES
Colour bond / colour steel Roof? YES
Timber surfaces? YES
Around fish ponds? NO

The concrete has not been stained. This is a sign of the product effectively deactivating and treating the mould. This will wash off over time with rainfall.

Yes, however take care not to spray the product onto your plants in the greenhouse. This is a surface treatment product and is not designed for use on plants.

Rinse off any overspray immediately. 30 Seconds Spray and Walk Away is a surface treatment designed with fungicidal properties and may affect sensitive foliage.
You must thoroughly rinse off any overspray immediately.

Keep pets indoors and away from the surface being treated during application of this product. Pets can be allowed back on to the treated surface only once it is completely dry. If your pets do come into contact with the wet surface, rinse their paws immediately.